logo

Třída Java.io.ObjectOutputStream v Javě | Sada 2

Třída Java.io.ObjectOutputStream v Javě | Sada 1 Další metody:
    void write(byte[] buf): Writes an array of bytes. This method will block until the byte is actually written.
      Syntax :  public void write(byte[] buf) throws IOException   Parameters:   buf - the data to be written   Throws:   IOException 
    void write(byte[] buf int off int len) : Writes a sub array of bytes.
      Syntax :  public void write(byte[] buf int off int len) throws IOException   Parameters:   buf - the data to be written off - the start offset in the data len - the number of bytes that are written   Throws:   IOException
    void write(int val) : Writes a byte. This method will block until the byte is actually written.
      Syntax :  public void write(int val) throws IOException   Parameters:   val - the byte to be written to the stream   Throws:   IOException 
    void writeBoolean(boolean val) : Writes a boolean.
      Syntax :  public void writeBoolean(boolean val) throws IOException   Parameters:   val - the boolean to be written   Throws:   IOException 
    void writeByte (int val) : Writes an 8 bit byte.
      Syntax :  public void writeByte(int val) throws IOException   Parameters:   val - the byte value to be written   Throws:   IOException
    void writeBytes (String str) : Writes a String as a sequence of bytes.
      Syntax :  public void writeBytes(String str) throws IOException   Parameters:   str - the String of writeBytes to be written   Throws:   IOException
    void writeChar(int val) : Writes a 16 bit char.
      Syntax :  public void writeChar(int val) throws IOException   Parameters:   val - the char value to be written   Throws:   IOException
    void writeChars(String str) : Writes a String as a sequence of chars.
      Syntax :  public void writeChars(String str) throws IOException   Parameters:   str - the String of chars to be written   Throws:   IOException
    protected void writeClassDescriptor(ObjectStreamClass desc) : Write the specified class descriptor to the ObjectOutputStream. Class descriptors are used to identify the classes of objects written to the stream. Subclasses of ObjectOutputStream may override this method to customize the way in which class descriptors are written to the serialization stream. The corresponding method in ObjectInputStream readClassDescriptor should then be overridden to reconstitute the class descriptor from its custom stream representation. By default this method writes class descriptors according to the format defined in the Object Serialization specification.
      Syntax :  protected void writeClassDescriptor(ObjectStreamClass desc) throws IOException   Parameters:   desc - class descriptor to write to the stream   Throws:   IOException
    void writeDouble (double val) : Writes a 64 bit double.
      Syntax :  public void writeDouble(double val) throws IOException   Parameters:   val - the double value to be written   Throws:   IOException
    void writeFields() : Write the buffered fields to the stream.
      Syntax :  public void writeFields() throws IOException   Throws:   IOException NotActiveException
    void writeFloat(float val) : Writes a 32 bit float.
      Syntax :  public void writeFloat(float val) throws IOException   Parameters:   val - the float value to be written   Throws:   IOException 
    void writeInt(int val) : Writes a 32 bit int.
      Syntax :  public void writeInt(int val) throws IOException   Parameters:   val - the integer value to be written   Throws:   IOException 
    void writeLong (long val) : Writes a 64 bit long.
      Syntax :  public void writeLong(long val) throws IOException   Parameters:   val - the long value to be written   Throws:   IOException 
    void writeObject(Object obj): Write the specified object to the ObjectOutputStream.The class of the object the signature of the class and the values of the non-transient and non-static fields of the class and all of its supertypes are written. Default serialization for a class can be overridden using the writeObject and the readObject methods. Objects referenced by this object are written transitively so that a complete equivalent graph of objects can be reconstructed by an ObjectInputStream.
      Syntax :  public final void writeObject(Object obj) throws IOException   Parameters:   obj - the object to be written   Throws:   InvalidClassException NotSerializableException IOException
    protected void writeObjectOverride(Object obj): Method used by subclasses to override the default writeObject method. This method is called by trusted subclasses of ObjectInputStream that constructed ObjectInputStream using the protected no-arg constructor. The subclass is expected to provide an override method with the modifier 'final'.
      Syntax :  protected void writeObjectOverride(Object obj) throws IOException   Parameters:   obj - object to be written to the underlying stream   Throws:   IOException 
    void writeShort(int val) : Writes a 16 bit short.
      Syntax :  public void writeShort(int val) throws IOException   Parameters:   val - the short value to be written   Throws:   IOException
    protected void writeStreamHeader() : The writeStreamHeader method is provided so subclasses can append or prepend their own header to the stream.It writes the magic number and version to the stream.
      Syntax :  protected void writeStreamHeader() throws IOException   Throws:   IOException
    void writeUnshared(Object obj):Zapíše 'nesdílený' objekt do ObjectOutputStream. Tato metoda je identická s writeObject kromě toho, že vždy zapíše daný objekt jako nový jedinečný objekt v proudu (na rozdíl od zpětné reference ukazující na dříve serializovanou instanci). Konkrétně:
    • Objekt zapsaný pomocí writeUnshared je vždy serializován stejným způsobem jako nově se objevující objekt (objekt, který ještě nebyl zapsán do streamu) bez ohledu na to, zda byl objekt zapsán dříve.
    • Pokud se writeObject používá k zápisu objektu, který byl dříve zapsán pomocí writeUnshared, předchozí operace writeUnshared je považována za zápis samostatného objektu. Jinými slovy ObjectOutputStream nikdy nebude generovat zpětné odkazy na data objektu zapsaná voláním writeUnshared.
    While writing an object via writeUnshared does not in itself guarantee a unique reference to the object when it is deserialized it allows a single object to be defined multiple times in a stream so that multiple calls to readUnshared by the receiver will not conflict. Note that the rules described above only apply to the base-level object written with writeUnshared and not to any transitively referenced sub-objects in the object graph to be serialized. ObjectOutputStream subclasses which override this method can only be constructed in security contexts possessing the 'enableSubclassImplementation' SerializablePermission; any attempt to instantiate such a subclass without this permission will cause a SecurityException to be thrown.
      Syntax :  public void writeUnshared(Object obj) throws IOException   Parameters:   obj - object to write to stream   Throws:   NotSerializableException InvalidClassException IOException 
    void writeUTF(String str) : Primitive data write of this String in modified UTF-8 format.Note that there is a significant difference between writing a String into the stream as primitive data or as an Object. A String instance written by writeObject is written into the stream as a String initially. Future writeObject() calls write references to the string into the stream.
      Syntax :  public void writeUTF(String str) throws IOException   Parameters:   str - the String to be written   Throws:   IOException
    void flush() : Flushes the stream. This will write any buffered output bytes and flush through to the underlying stream.
      Syntax :  public void flush() throws IOException   Throws:   IOException
Program: Java
//Java program demonstrating ObjectOutputStream //write methods import java.io.*; class ObjectOutputStreamDemo {  public static void main(String[] args) throws IOException ClassNotFoundException   {  FileOutputStream fout = new FileOutputStream('file.txt');  ObjectOutputStream oot = new ObjectOutputStream(fout);    String a = 'GeeksforGeeks';  String b = 'Geek';  byte[] be = {'A''B''C'};  //illustrating write()  oot.write(1);  //illustrating writeInt(int i)  oot.writeInt(1);  //illustrating writeBoolean(boolean a)  oot.writeBoolean(true);  //illustrating writeObject(Object x)  oot.writeObject(a);  //illustrating writeByte(byte a)  oot.writeByte(65);  //illustrating writeBytes(String b)  oot.writeBytes(b);  //illustrating writeDouble(double d)  oot.writeDouble(2.3);  //illustrating writeUTF(String str)  oot.writeUTF(a);  //illustrating writeFloat(float x)  oot.writeFloat(2.42f);  //illustrating writeLone(long x)  oot.writeLong(234342347908l);  //illustrating writeChars(String a)  oot.writeChars(a);  //illustrating writeShort(int val)  oot.writeShort(2);  //illustrating write(byte[] buff)  oot.write(be);    //flushing the stream  oot.flush();    oot.close();    byte c[]=new byte[4];  char c1[]=new char[13];    FileInputStream fin = new FileInputStream('file.txt');  ObjectInputStream oit = new ObjectInputStream(fin);    System.out.println(oit.read());  System.out.println(oit.readInt());  System.out.println(oit.readBoolean());  System.out.println(oit.readObject());  System.out.println(oit.readByte());  oit.read(c);    for (int i = 0; i < 4 ; i++)   {  System.out.print((char)c[i]);  }    System.out.println();  System.out.println(oit.readDouble());  System.out.println(oit.readUTF());  System.out.println(oit.readFloat());  System.out.println(oit.readLong());    for (int i = 0; i < 13 ; i++)  {  System.out.print(oit.readChar());  }    System.out.println();  System.out.println(oit.readShort());  oit.readFully(be);    for (int i = 0; i < 3 ; i++)   {  System.out.print((char)be[i]);  }  oit.close();  } } 
výstup:
1 1 true GeeksforGeeks 65 Geek 2.3 GeeksforGeeks 2.42 234342347908 GeeksforGeeks 2 ABC
Program 2: Java
//Java program illustrating ObjectOutputStream //write methods import java.io.*; class ObjectOutputStreamDemo {  public static void main(String[] args) throws IOException  ClassNotFoundException  {  FileOutputStream out = new FileOutputStream('file.txt');  ObjectOutputStream oout = new ObjectOutputStream(out);  oout.writeObject(new demo());    //illustrating writeUnshared()  //Writes an 'unshared' object to the ObjectOutputStream.  oout.writeUnshared(14);    //flush the stream  oout.flush();    oout.close();  FileInputStream fin=new FileInputStream('file.txt');  ObjectInputStream ois=new ObjectInputStream(fin);  // read an object from the stream and cast it to demo  demo obj = (demo)ois.readObject();    System.out.println( obj.var);  System.out.println(ois.readUnshared());  } } class demo implements Serializable {  static int var = 25;    // assign a new serialPersistentFields  private static final ObjectStreamField[] serialPersistentFields =   {  new ObjectStreamField('var' Integer.TYPE)  };  private void readObject(ObjectInputStream in)  throws IOException ClassNotFoundException  {  // makes them available by name.  ObjectInputStream.GetField fields = in.readFields();    //Get the value of the named int field from the persistent field.  var = fields.get('var' 0);  }  private void writeObject(ObjectOutputStream out)  throws IOException  {  // write into the ObjectStreamField array the variable string  ObjectOutputStream.PutField fields = out.putFields();  fields.put('var' var);    //Write the buffered fields to the stream  out.writeFields();  } } 
výstup:
25 14
Vytvořit kvíz